Water Resources Engineering II Pdf Notes- WRE II Pdf Notes
Water Resources Engineering II notes pdf – WRE II pdf notes – WRE II notes pdf file to download are listed below please check it
Note :- These notes are according to the R09 Syllabus book of JNTU.In R13 and R15,8-units of R09 syllabus are combined into 5-units in R13 and R15 syllabus. If you have any doubts please refer to the JNTU Syllabus Book.
Storage Works-Reservoirs -Types of reservoirs, selection of site for reservoir, zones of storage of a reservoir, reservoir yield, estimation of capacity of reservoir using mass curve- Reservoir Sedimentation – Life of Reservoir.. Types of dams, factors affecting selection of type of dam, factors governing selection of site for a dam.
Gravity dams: Forces acting on a gravity dam, causes of failure of a gravity dam, elementary profile and practical profile of a gravity dam, limiting height of a low gravity dam, Factors of Safety – ‘Stability Analysis, foundation for a Gravity Dam, drainage and inspection galleries.
Earth dams: types of Earth dams. causes of failure of earth dam, criteria for safe design of earth dam, seepage through earth dam-graphical method. measures for control of seepage.
Spillways: types of spillways, Design principles of Ogee spillways – Spillway gates. Energy Dissipaters and Stilling Basins Significance of Jump Height Curve and Tail Water Rating Curve – USBR and Indian types of Stilling Basins.
Water Resources Engineering II Notes Pdf – WRE II Notes Pdf
Diversion Head works: Types of Diversion head works- weirs and barrages, layout of diversion head work – components. Causes and failure of Weirs and Barrages on permeable foundations,-Silt Ejectors and Silt Excluders
Weirs on Permeable Foundations — Creep Theories – Bligh’s, Lane’s and Khosla’s theories, Determination of uplift pressure- Various Correction Factors – Design principles of weirs on permeable foundations using Creep theories – exit gradient, U/s and D/s Sheet Piles – Launching Apron.
Canal Falls – types of falls and their location, Design principles of Notch Pall and Sarada type Fall.
Canal regulation works, principles of design of distributory and head regulators.
The Canal Cross Regulators canal outlets types of canal modules proportionality, sensitivity and ﬂexibility.
Cross Diainagé works : types,selection site, Design principles of aqueduct, siphon aqueduct super passage. Design of Type II Aqueduct (Under Tunnel)
Reference – Water Resources Engineering II Pdf Notes- WRE II Pdf Notes – WRE II Pdf – WRE II Notes
1. Irrigation and water resources engineering by G.L. Asawa, New Age International Publishers
2 Theory and Design of Hydraulic structions by Varshney, Gupta & Gupta
3. Irrigation engineering by K.R.Arora
4.Irrigation-Engineering byR.K.Sharma-and T.K.Sharma, S.Chand publishers
5. Introduction of hydrology by Warren Viessvann,Jr.Garyl Lewis, PHI
6 Engineering Hydrology by-CS Pojha. R. Berndtsson and P. Bhunya, . Oxford University Press.
Text books – Water Resources Engineering II notes – WRE II pdf – WRE II pdf notes- WRE Notes
l. Irrigation engineering and hydraulic structures by S.K Garg, Khanna publishers.
2 Irrigation and water power engineering by Punmia &’Lal. Laxmi publications pvt.Ltd 146., New Delhi